Product code: VOKIT-ATBALFSHH
Get the Kit, consists of the below.
ArcTech Merino™ is a blend of merino and viscose fibres, which gives maximum protection from arc-flash, but is still incredibly comfortable to wear.
NFPA70 E Level 2: >8.0cal/cm²
Fire retardant
ISO 15025 A: Flame spread and surface ignition
Soft, warm, comfortable and durable
Anti-bacterial properties
One Size Fits All - MADE IN NEW ZEALAND BY JAEDON
Has a slight 'Smoke Tint' which is prefered by most users. 'Yellow Tinted' faceshields can distort the colours of the wires. eg. Blue can look Green.
BSD ErgoS Faceshield is rated at 10.7cal/cm². AS/NZS4386:2011
BSD ErgoS Faceshield is made in Germany.
Unvented
Type 1 industrial safety helmets are suitable for general industry including construction, mining, forestry, heavy engineering and resource drilling
Injection moulded ABS (plastic) shell
Foam backed terry towelling harness headband
Adjustment range 50cm to 66cm
Certified to AS/NZS 1801:1997 Type 1 ABS, for general industrial use
650v
Click Here for the Fact Sheet on NFPA70E
What is Arc Flash Clothing?
A typical work day for many electrical workers involves hazardous tasks and a high risk of electrical shock and injury. From repairing broken wires to working on electrical lines, electrical workers must wear the proper protective equipment and arc flash clothing to stay safe should an arc flash explosion occur.
What is Arc Rated?
The Difference Between Arc Rated (AR) and Flame Resistant (FR) ... The letters “AR” stand for Arc Rated, and made their debut in the recent revision of NFPA 70E; the short explanation of the difference is that ALL AR clothing is flame resistant (FR), but not all FR clothing has been Arc Rated.
What does HRC2 mean?
Garments compliant to HRC (Hazard Risk Category) 2, as defined by NFPA 70E, 2012 edition, have an arc rating that is greater than or equal to 8 cal/cm², but is less than 25 cal/cm². HRC 2 may also be called Level 2.
What is an Electric Arc Flash?
An arc flash (also called a flashover), which is distinctly different from the arc blast, is part of an arc fault, a type of electrical explosion or discharge that results from a low-impedance connection through air to ground or another voltage phase in an electrical system.
What is the ATPV rating?
ASTM Standard Definitions: ATPV (Arc Thermal Performance Value) is the incident energy on a material that results in a 50% probability that sufficient heat transfer through the specimen is predicted to cause the onset of second-degree burn injury based on the Stoll Curve, cal/cm²