Product code: ECARBSHRT
Fabric composition:
FRONT & BACK
88% Cotton/12% High Tenacity Nylon
Garments comply with:
NFPA 70 E, Level 2, > 8.0 cal/cm2 (9.2cal) ,
Fabric tested to NFPA 2112- (Standard for flame resistant clothing for protection of industry personnel against short term duration thermal exposure to fire.)
ISO 11611.2007- Protective clothing for use in welding and allied processes,
ISO 11612.2008- Protective clothing to protect against heat and flame.
Complies with: TTMC-W17
Sizes available:
SM–3XL, 5XL
AS/NZS 1906.4:2010 - High visibility materials for safety garments
This standard specifies minimum colour and luminance requirements for fluorescent (F) or non-fluorescent (NF) background (compliant) materials and retro-reflective material (reflective tape) as used in the manufacture of garments for high risk applications.
“Class F” (fluorescent background material):
Refers to Fluorescent fabrics which have fluoro pigments. These include all our Safety Vests, Polo’s, Polyester/Cotton Shirts and Rainwear. Our Fluoro Yellow and Fluoro Orange Polycotton Protex Overalls also meet “Class F”. This includes DOPPC, TTPPCLT & CTPPCLW styles.
“Class NF” (Non—fluorescent background material):
All 100% Cotton Overalls, our natural fibres CTPCNLW and FTPCNLW, the Modacrylic FEPVC and FJPVC, and the 100% cotton Shirts are “Class NF” (Non—fluorescent background material). In general, natural fibres are not capable of taking a fluorescent pigment. The main difference is Class F garments have to meet a lot higher minimum luminance level than Class NF garments.
Click Here for the Fact Sheet on NFPA70E
CLICK HERE FOR THE NFPA70E BLOG
CLICK HERE FOR VIDEOS RELATING TO NFPA70E AND RECENT CHANGES
What is Arc Flash Clothing?
A typical work day for many electrical workers involves hazardous tasks and a high risk of electrical shock and injury. From repairing broken wires to working on electrical lines, electrical workers must wear the proper protective equipment and arc flash clothing to stay safe should an arc flash explosion occur.
What is Arc Rated?
The Difference Between Arc Rated (AR) and Flame Resistant (FR) ... The letters “AR” stand for Arc Rated, and made their debut in the recent revision of NFPA 70E; the short explanation of the difference is that ALL AR clothing is flame resistant (FR), but not all FR clothing has been Arc Rated.
What does HRC2 mean?
Garments compliant to HRC (Hazard Risk Category) 2, as defined by NFPA 70E, 2012 edition, have an arc rating that is greater than or equal to 8 cal/cm², but is less than 25 cal/cm². HRC 2 may also be called Level 2.
What is an Electric Arc Flash?
An arc flash (also called a flashover), which is distinctly different from the arc blast, is part of an arc fault, a type of electrical explosion or discharge that results from a low-impedance connection through air to ground or another voltage phase in an electrical system.
What is the ATPV rating?
ASTM Standard Definitions: ATPV (Arc Thermal Performance Value) is the incident energy on a material that results in a 50% probability that sufficient heat transfer through the specimen is predicted to cause the onset of second-degree burn injury based on the Stoll Curve, cal/cm²